Palm oil press machine manufacturer

Henan Doing Company designs palm oil pressing machine production line to achieve crude palm oil from palm fruits and bunches. This type of self-sufficient palm oil making process adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution. Palm fruit oil pressing production line introduction: The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation. Palm fruits are sent into crude palm oil processing plant with following production process: ● Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent. ● Unloading fruit. Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from palm oil making machine. ● Sterilizing. FFB will pass high pressure and high temperature sterilization after entering sterilizing tank. It will soft and make sterilization for FFB. ● Threshing. Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften duirng fermentation. ● Empty fruit bunches (EFB). EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding. ● Meshing. Mixing tank will mesh and crush palm fruit until broken after fruit threshing. ● Pressing. The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine. Other information: Skype:sophia.zang1 Mobile:+86 158 3826 3507 Phone:+86-371-5677 1823 Website:www.palmoilextractionmachine.com E-mail: palmoil@doingmachinery.com